SMART GUARD LINE INTERACTIVE SINEWAVE UPS (MUTE TYPE)
Designed with simple controls for easy operation, the smart Guard UPS provides true sine-wave power regardless of the input power profile, making it ideal for electronic equipment that is sensitive to any power fluctuations. The smart Guard family offers power protection in 1KVA-5KVA is excellent power protection for your Networks and Servers.
Functions & Fetures:
‧Rack & Tower Transmutable
‧Easy replacement Swap Battery
‧Line interactive design
‧Boost and buck AVR
‧Intelligent fan speed control
‧Pure sine wave output
‧Fully digitized microprocessor controlled
‧Smart RS-232 communication port
‧Lightning and surge protection
‧Normal、back up、fault status LED or LCD display
‧Short circuit and overload protection
‧50/60Hz frequency auto sensing
‧Tel/modem internet spike protection
‧Smart power management with software
‧Load/Battery power meter display
‧Energy saving (UPS sleep mode)
‧Cold start (DC power on)
‧SNMP capability (optional)
‧ USB capability (optional)
Model |
Standard Mode |
3U-M7500 |
3U-M10000 |
||
Capacity |
VA / Watt |
7.5KVA / 4680W |
10KVA / 6250W |
||
Input |
Nominal Voltage |
110Vac / 220Vac |
|||
|
Acceptable |
110Vac ±30% / 220Vac ±30% |
|||
Frequency |
50Hz ±10%/ 60Hz ±10% Auto Sensing |
||||
Boost Transfer |
100Vac ± 2% / 200Vac ± 2% |
||||
Boost Return |
105Vac ± 2% / 210Vac ± 2% |
||||
Buck Transfer |
120Vac ± 2% / 240Vac ± 2% |
||||
Buck Return |
115Vac ± 2% / 230.0Vac ± 2% |
||||
Line Low Transfer |
85Vac ± 2% / 170Vac ± 2% |
||||
Line Low Return |
90Vac ± 2% / 180Vac ± 2% |
||||
Line High Transfer |
145Vac ± 2% / 290Vac ± 2% |
||||
Line High Return |
140Vac ± 2% / 280Vac ± 2% |
||||
Output |
Voltage |
110Vac / 220Vac ----- LCD panel |
|||
Voltage Regulation |
Line Mode |
± 15% |
|||
|
± 5% RMS for entire battery voltage range |
||||
Frequency Regulation |
Line Mode |
Follow Ac Line Hz |
|||
|
50Hz or 60Hz ±0.1Hz |
||||
Waveform |
Pure Sine wave |
||||
Power Factor |
0.6 |
||||
Effiecincy |
> 80% |
||||
Overload Protection |
Line Mode |
Circuit Breaker |
|||
|
110% ~ 150% for 30 sec. , >150% for 200ms |
||||
Transfer Time |
Typical |
2-4 ms. |
|||
|
|
48Vdc |
48Vdc |
||
|
7.2AH |
9AH |
|||
|
16pcs |
16pcs |
|||
Backup Time |
Standard Mode |
5-10 min ( at full load ) |
|||
Recharge |
Standard Mode |
4 hours ( to 90% of full capactity ) |
|||
Display for LCD |
LCD |
UPS status, I/P&O/P Voltage Frequency, Load%, |
|||
LED |
|
||||
Audible Alarm |
|
Beeping every 4 seconds |
|||
Low |
Beeping every 1 second |
||||
UPS Fault |
Beeping Continuously |
||||
Overload |
Beeping twice per second |
||||
|
|
RS232 |
|||
Environment |
Operation Temperature |
0-40 degree C; 32-104 degree F |
|||
Relative Humidity |
0-95% non-dondensing |
||||
Audible Noise |
Less than 45dBA (at |
||||
Physical |
Standard Mode |
Net Weigh (Kgs) |
34.6Kgs (w/o battery) |
36.6Kgs (w/o battery) |
|
( 110V / 220V) |
|||||
(DxWxH)mm |
440*132*465 (3U) |
440*132*465 (3U) |
|||
Interface |
RS232 / USB |
Support Windows 95/98/NT/2000/XP, Novell , and Linux |
|||
‧Empty Battery Bank +16pcs Battery ( optional ) |
12V7AHX16PCS |
12V9AHX16PCS |