Rack mount 1U
Code 1U-R
CTR 2662
Designed with simple controls for easy operation, the Smart Guard UPS provides true sinewave power regardless of the input power profile, marking it ideal for electronic equipment that is sensitive to any power fluctuations. The Smart Guard family offers power protection in 650VA-10KVA is excellent power protection for your Networks and Servers.
Fetures:
‧Line interactive design
‧Boost and buck AVR
‧Intelligent fan speed control
‧Pure sine wave output
‧Fully digitized microprocessor controlled
‧Smart RS-232 communication port 1U Rack Mount type Front side
‧Lightning and surge protection
‧Normal、back up、fault status LED or LCD display
‧Short circuit and overload protection
‧50/60Hz frequency auto sensing
‧Tel/modem internet spike protection
‧Smart power management with software
‧Load/Battery power meter display
‧Energy saving (UPS sleep mode)
‧Cold start (DC power on)
‧SNMP capability (optional) Back Panel side
‧USB capability (optional)
|
Model |
Standard Mode |
1U-R1000 |
1U-R1500 |
||
|
Capacity |
VA / Watt |
1KVA / 600W |
1.5KVA / 900W |
||
|
Input |
Nominal Voltage |
110Vac / 220Vac |
|||
|
|
Acceptable |
110Vac ±30% / 220Vac ±30% |
|||
|
Frequency |
50Hz ±10%/ 60Hz ±10% Auto Sensing |
||||
|
Boost Transfer |
100Vac ± 2% / 200Vac ± 2% |
||||
|
Boost Return |
105Vac ± 2% / 210Vac ± 2% |
||||
|
Buck Transfer |
120Vac ± 2% / 240Vac ± 2% |
||||
|
Buck Return |
115Vac ± 2% / 230.0Vac ± 2% |
||||
|
Line Low Transfer |
85Vac ± 2% / 170Vac ± 2% |
||||
|
Line Low Return |
90Vac ± 2% / 180Vac ± 2% |
||||
|
Line High Transfer |
145Vac ± 2% / 290Vac ± 2% |
||||
|
Line High Return |
140Vac ± 2% / 280Vac ± 2% |
||||
|
Output |
Voltage |
110Vac / 220Vac ---- Remote Control |
|||
|
Voltage Regulation |
Line Mode |
± 15% |
|||
|
|
± 5% RMS for entire battery voltage range |
||||
|
Frequency Regulation |
Line Mode |
Follow Ac Line Hz |
|||
|
|
50Hz or 60Hz ±0.1Hz |
||||
|
Waveform |
Pure Sine wave |
||||
|
Power Factor |
0.6 |
||||
|
Effiecincy |
> 80% |
||||
|
Overload Protection |
Line Mode |
Circuit Breaker |
|||
|
|
110% ~ 150% for 30 sec. , >150% for 200ms |
||||
|
Transfer Time |
Typical |
2-4 ms. |
|||
|
|
|
24Vdc |
24Vdc |
||
|
|
6V/7.2AH |
6V/7.2AH |
|||
|
|
4pcs |
4pcs |
|||
|
Backup Time (Full load) |
5~10 mins (30~60 mins for one PC) |
||||
|
Recharge current |
|
||||
|
Display |
LCD |
UPS Status, I/P& OP Voltage Frequency, load level , battery voltage & level, temperature ,model |
|||
|
LED |
|
||||
|
Audible Alarm |
|
Beeping every 4 seconds |
|||
|
Low |
Beeping every 1 second |
||||
|
UPS Fault |
Beeping Continuously |
||||
|
Overload |
Beeping twice per second |
||||
|
|
|
RS232 |
|||
|
Environment |
Operation Temperature |
0-40 degree C; 32-104 degree F |
|||
|
Relative Humidity |
0-95% non-dondensing |
||||
|
Audible Noise |
Less than 45dBA (at |
||||
|
Physical |
Standard Mode |
Net Weigh (Kgs) |
18Kgs |
20Kgs |
|
|
( 110V / 220V) |
|||||
|
(DxWxH)mm |
440*44*515 |
440*44*515 |
|||
|
Interface |
RS232 / USB |
RS232 |
|||
|
* Specifications are subjected to change without prior notice. |
|||||
